Al-Fix Super Fast Colourless Filling Gel

Novatio's Al-Fix Gel is an adhesive that bonds in seconds and has a special formula based on cyanoacrylate. A one component adhesive which is solventless and consists mainly of Ethyl Cyanoacrylate Monomer. Al-Fix Gel is temperature resistant from -30 degrees Celsius to +100 degrees Celsius.

Al-Fix Gel Benefits:

  • Based on cyanacrylate
  • Bonds in seconds
  • No heating, soldering or mixing
  • High tensile sheer strength - shows no shrinkage
  • Very economical - the thinner the adhesive, the stronger the joint
  • Resistant to solvents, oils, benzene, temperature fluctuations and atmospheric conditions

Application Information

Al-Fix Gel provides an exceptionally strong bond between almost all kinds of materials, with the exception of polyethylene, polypropylene and flurine containing materials. Al-Fix Gel is recommended when a thicker adhesive seam and better filling is required. 

Materials which can be bonded with AL-FIX GEL are: ABS, aluminium, bakelite, bronze, buthyl, celluliod, chloroprene, chrome, delrin, glass, copper, natural rubber, NBR, neoprene, nitril, nylon, phenol, polycarbonate, polystyrene, porcelain, hard pvc and stainless steel.

Contact Us today

Olmurtech's Novatio range is sold direct to the public, so get in touch today


contact us

Technical Information

Colour: crystal clear.
Viscosity mPa's Brookfield 20°C: 60.000 - 90.000.
Specific gravity gr/cm² 20°C: 1.08.
Flashpoint DIN 55213 in °C: 87.
Initial hardening on alu in sec. at 23°C 50%:
r.v.: 60 - 100 on 
Nora Rubber: 12 - 25 on hard 
PVC: not appropriate.
Shelf life: 9 months, keep dry, cool and frost-proof.
Safety measures: consult the Safety Data Sheet.
technical data sheet
al-fix gel aus sds
al-fix gel nz sds

Do you need technical or application support?

Contact Olmurtech today if you need technical advice or help finding an adhesive solution for your next project

Scroll to Top