Prepare and Finish

Tec7 Prepare & Finish

The perfect preparation & finish for adhesives & sealants

Finally one cleaner that prepares the surface and finishes off adhesive and sealant joints!

Prepare & Finish is pH neutral, therefore safe on every surface, compatible with every type of adhesive or sealant and removes both fine dust and grease as well as finger marks. Cleaning and degreasing with Prepare & Finish ensures a perfect bonding without risk of staining. Smoothing with Prepare & Finish ensures perfectly smooth and closed joints, accelerates the curing of adhesives & sealands and reduces the risk of mould growth on sanitary joints. Contains no propellants, is biodegradable and non-toxic.

*Compatible with MS polymers, silicones, acrylic sealants, PU adhesives and many more.

*Can be painted over without rinsing if the substrate permits.


Tec7 Prepare & Finish User Instructions

Cleaning before bonding and sealing

  • Remove as much loose dirt as possible with a brush or cloth.
  • Spray the surface. When gluing, treat both surfaces.
  • Leave for 30 to 60 seconds.
  • Rub away the loosened contamination with a clean microfibre cloth.
  • Allow to evaporate for a few minutes before applying adhesive or sealant.

Smoothing of joints

  • Moisten the spatula, applicator tool or finger with Prepare & Finish.
  • Smooth the joint and remove excess material.  

Find A Stockist Near You

Technical Information

Composition: aqueous complex of surfactants and alcohols
Form: liquid
Colour: transparent
Odour: characteristic
Relative density (at +20°C): 1
pH: 7 (neutral)
Consumption per 400ml:
+/- 70 running meters (preparation and finishing)
+/- 12 m² (cleaning before gluing)
Safety measures: Please consult the safety data sheet.

Prepare and Finish

Do you need technical or application support?

Contact Olmurtech today if you need technical advice or help finding an adhesive solution for your next project

Scroll to Top