Prepare & Finish
The perfect preparation & finish for adhesives & sealants
- Cleaning, degreasing and smoothing
- Professional smoothing of all sealants
- Can be painted over without rinsing*
- Handy packaging with high efficiency (Bag-on-Valve)
Prepare & Finish
Finally, one cleaner that prepares the surface and finishes off adhesive and sealant joints!
PREPARE & FINISH is pH neutral, therefore safe on every surface, compatible with every type of adhesive or sealant and removes both fine dust and grease as well as finger marks. Cleaning and degreasing with PREPARE & FINISH ensures a perfect bonding without risk of staining. Smoothing with PREPARE & FINISH ensures perfectly smooth and closed joints, accelerates the curing of adhesives & sealants and reduces the risk of mould growth on sanitary joints. Contains no propellants, is biodegradable and non-toxic.
Technical Information
Specifications
- Composition: aqueous complex of surfactants and alcohols.
- Form: liquid.
- Colour: transparent.
- Odour: characteristic.
- Relative density (at +20°C): 1.
- pH: 7 (neutral).
- Consumption per 400ml:
- +/- 70 running meters (preparation and finishing).
- +/- 12 m² (cleaning before gluing).
- Shelf life: 24 months, dry, cool and frost-free.
Instructions
Cleaning before bonding and sealing
- Remove as much loose dirt as possible with a brush or cloth.
- Spray the surface. When gluing, treat both surfaces.
- Leave for 30 to 60 seconds.
- Rub away the loosened contamination with a clean microfibre cloth.
- Allow to evaporate for a few minutes before applying adhesive or sealant.
Smoothing of joints
- Moisten the spatula, applicator tool or finger with Prepare & Finish.
- Smooth the joint and remove excess material.
This information is provided as general guidance only and may not apply to all situations. For project-specific applications, please contact us directly to discuss the correct product selection, load requirements, and technical specifications.
