Prepare & Finish

Prepare & Finish

The perfect preparation & finish for adhesives & sealants

Finally, one cleaner that prepares the surface and finishes off adhesive and sealant joints!

PREPARE & FINISH is pH neutral, therefore safe on every surface, compatible with every type of adhesive or sealant and removes both fine dust and grease as well as finger marks. Cleaning and degreasing with PREPARE & FINISH ensures a perfect bonding without risk of staining. Smoothing with PREPARE & FINISH ensures perfectly smooth and closed joints, accelerates the curing of adhesives & sealants and reduces the risk of mould growth on sanitary joints. Contains no propellants, is biodegradable and non-toxic.


Contains no propellantsBiodegradableNon-toxicCompatible with MS polymers, silicones, acrylic sealants, PU adhesives and many moreCan be painted over without rinsing if the substrate permits

User Instructions

Cleaning before bonding and sealing

Remove as much loose dirt as possible with a brush or clothSpray the surface. When gluing, treat both surfacesLeave for 30 to 60 secondsRub away the loosened contamination with a clean microfibre clothAllow to evaporate for a few minutes before applying adhesive or sealant

Smoothing of joints

Moisten the spatula, applicator tool or finger with PREPARE & FINISHSmooth the joint and remove excess material

Technical Information

Composition: aqueous complex of surfactants and alcohols.
Form: liquid.
Colour: transparent.
Odour: characteristic.
Relative density (at +20°C): 1.
pH: 7 (neutral).
Consumption per 400ml:
+/- 70 running meters (preparation and finishing);
+/- 12 m² (cleaning before gluing).
Safety measures: Please consult the safety data sheet.

Do you need technical or application support?

We're only to happy to have a chat to provide solutions or advice

Copyright © 2023 Olmurtech | Privacy Policy | Tec7 and Novatio are registered trademarks of Novatech International N.V in Belgium