Elastic Repair for Finishing Plaster

Available in 750ml and 5L tubs

The TEC7 FILLER can be used for filling holes, tears and joints in walls and ceilings, plaster and stucco, plasterboard, gypsum board and blocks, wood, soft board and hard board, stone, limestone, porous concrete and all porous construction materials. Use for professional repairs of damages on painted or plastered surfaces. TEC7 FILLER can be painted over quickly.

Filler is the perfect preparation and
 ensures a smooth finish before painting, hanging or decorating walls and ceilings, woodwork, plasterboard and stucco.

Not suitable for use on surfaces such as metal or plastic.


Snow-white, superlight, elastic repair and finishing plasterReady to use indoors and outdoorsEasy to use pasteGrain-free structureEasy to spread smoothlySuper fine resultCuts down on sandingExcellent bond on all porous constructions materialsWater-resistant and can be quickly painted overHandless shrinkage and expansion without tearingKeeps for a long time, even after having been open frequently

User Instructions

Apply TEC7 FILLER on a dry, dust-free and grease-free surface, free of loose paint chips, plaster, etc.To strengthen weak and/or loose surfaces, treating beforehand with Fixprimer (fixer) is recommendedTo obtain quicker hardening with repairs deeper than 3cm, build TEC7 FILLER up in layers

Technical Information

Viscosity: paste.
Density: (23 °C): 0,420 +/- 0,010 g/cm³.
Base: Acryl dispersion.
Hardening: shrinkage and tear-free.
Skin formation by 23°C and 65% R.H.: < 20 min.
Can be painted over: after 1 hour.
Transport temperature: between -15°C and +40°C.
Application temperature: between +5°C and +30°C.
Temperature resistance after curing: from -20°C up to +100°C.
Storage life: 24 months, dry and at temperatures between +5°C and +35°C.
Safety measures: please consult safety data sheet.

Do you need technical or application support?

We're only to happy to have a chat to provide solutions or advice

Copyright © 2023 Olmurtech | Privacy Policy | Tec7 and Novatio are registered trademarks of Novatech International N.V in Belgium