Tec7

Tec7 Bond, Mount and Seal, Even Underwater

Available in White, Grey & Black

Available in 310ml cartridges or 600ml sausages

TEC7 is an all-in-one, offering just one product instead of seven to get the job done.

Not to be confused with a silicone sealant, TEC7 is a solvent free MS polymer based product that bonds, seals and mounts...even under water! TEC7 is the original all-rounder. For more than 25 years now, TEC7 has been the best-known sealant for bonding, sealing and fastening.

When it really has to be good, professionals and experienced handymen reach for the TEC7 tube. And rightly so! TEC7 is the first choice for 80% of all applications. For all applications: in the construction and sanitary sectors and general maintenance. TEC7 replaces mounting, wood and PU adhesive, silicone sealant, sanitary silicone sealant, acrylate adhesive and butyl caulking.

Tec7 Benefits

  • Fast curing 
  • Permanently flexible and resists vibrations
  • Applicable both indoors and outdoors
  • Cures shrink-free

Tec7 Uses: Bonding

  • Bonding of insulation, even on wet surfaces. TEC7 does not dissolve polystyrene foam.
  • As a mounting adhesive for bonding skirting boards, lathing, sidings, eaves, laths on brick, gyproc, celular concrete, Ytong, mortar, etc. TEC7 replaces mechanical attachments
  • As a sealant for both wet and difficult surfaces.
  • Does not attack natural stone like marble, Belgian blue stone and granite.
  • Ideal as a sealant between windows and brickwork.
  • Can be painted perfectly, even with acrylate dispersion paints.
  • Windows and Verandas: bonding of glass in synthetic and aluminium profiles, bonding of adhering pieces and corner pieces in the production of windows.

Tec7 Uses: Construction

  • Bonding of ferrous and non-ferrous plates on window works
  • Bonding of mirrors does not attack the silver coating
  • Bonding of decorative panels
  • In the construction of elevators, good adhesion to painted surfaces
  • Bonding of wooden or metal table tops
  • Bonding of synthetic plates and insulation in refrigerators
  • Bonding of characters and names plates on gravestones and fronts
  • Sealing and bonding of containers

Tec7 Uses: Air Conditioning and Ventilation

  • Sealing of both PVc and metal tubing
  • Excellent bonding also on galvanized ducts
  • Sanitary
  • As a sealant, even on wet surfaces
  • Does not attack acrylate
  • Tec 7 is U.V. resistant, anti-fungal and anti-bacterial

Tec7 Uses: General Maintenance

  • TEC7 bonds to most surfaces, containts no solvents, does not attack synthetic material
  • TEC7 combines the advantages of an acrylic and silicone sealant, without the disadvantages of these two products
  • Reduces your stock of different products
  • TEC7 replaces: mounting, wood and P.U. adhesive, silicone sealants, sanitary silicone sealants, acrylic sealants, butyl rubber sealants.
As a universal adhesive, TEC7 adheres to most substrates and does not attack synthetic materials to mirrors (vertical adhesive beads), natural stone (does not bleed through), polyester, polystyrene foam, moist substrates, even under water, overpaintable with most common paints, alkyd resin-based lacquer, applied to TEC7, can have a slower drying processTEC7 has lower adhesion on PP, PE, bitumen and silicones.

Find A Stockist Near You

Our products are available in over 70 stockists across Australia.

Contact Us

Technical Information

Base: MS polymer.
Flow: 5 bar/ 3 mm/ 23°C 140g/min.
Skin formation: 23°C 50% R.V. 8 minutes.
Tack-free: 23°C 50% R.V. 25 minutes.
Full hardening: 23°C 50% R.V.:
24h - 6 mm
48h - 7 mm
72h - 8 mm
E-modulus 100%: 172N/cm² /1.72 Mpa.
Electric resistance: 2,6 x 10² Ohm/cm.
Volume shrinkage after curing: <3%.
Hardness - DIN 53505: 60 Shore A.
Tensile Strength:
after 7 days: 260 N/cm²
after 1 month: 280 N/cm²
after 3 months: 310 N/cm².
Tear strength - DIN 53504: 140N/cm² /1.40 Mpa.
The ambient temperature for application: between +5°C and +40°C.
Thermal stability: -40°C to +90°C /peak: 155°C max. 30 minutes.
Elongation at break - Din 53504: > 350%.Air permeability (according to report 3P02093 of the SP TRI in Sweden:
>0,2m³/m².
Non-toxic.
Water vapour transmission (DIN EN ISO 12572): 1,6.Pressure resistance (ISO 11432): 1,19 N/mm².
Chemical resistance:
good: water, seawater, aliphatic solvents, oils, greases, diluted organic acids, lyes
moderate: esters, ketones, aromatics.
poor: concentrated acids, chlorinated solvents, chlorine of swimming pools.
Shelf life: 18 months.
technical data sheet
tec7 aus sds
tec7 NZ sds

Not sure if this is the right product you need?

Tell us what you need to do and we will let you know what product is right the job and how to use it.
Contact Information
  • Phone
07 3419 8478
  • Customer Service
info@olmurtech.com.au
  • Sales & Business Development
sales@olmurtech.com.au
  • Address
Brendale Business Park
70/193-203 South Pine Road, Brendale, QLD, 4500
Contact Us
Scroll to Top