Extreme Bonding Without Support

Available in White, Grey & Black

Apply, position and forget with this instant grab adhesive. No messing around with clamps, screws or temporary structures. With Tec 7 X-TACK you maintain control of all assemblies. The TEC7 Cleaner is the perfect partner for X-TACK. This safe solvent cleaner ensures a grease-free substrate to which perfect adhesion is possible.

X-Tack Features

  • The fastest assembly adhesive of all MS polymers
  • Super strong, structual bonding
  • Vibration, impact and shock resistant
  • 100% waterproof assembly and can be painted over with most lacquers and paints
  • Odurless and solvent-free, so it can be used in confined spaces
  • Perfect for vertical bonding
  • Permanently elastic
  • Does not sag up to a 40mm thick joint
  • X-TACK replaces soldering, bolts, nuts, nails etc and save you time and money

X-Tack Uses

  • Wall and facade covering: ACM, plaster, natural stone, brick, concrete, aluminum, glass, etc.
  • Sign installation: ACM panels
  • Ceiling panels: All thermal panels, synthetic panels, wood, PVC, PUR, etc.
  • Window frames: Coated aluminium, solid wood, synthetic.
  • Door frames and window sills: Natural or coated, natural stone, brick, concrete, aluminium, brass etc. Does not leak.
  • Floor, wall tiles and plinths: Marble, granite, blue stone, porous materials and earthenware.
  • Roofing elements: All roofing elements made from wood, steel or in combination with roof covering and lead sheets (excludes bitumen).
  • Construction elements: All construction elements made from stainless steel, aluminuim, metal, copper, etc.

Find A Stockist Near You

Our products are available in over 70 stockists across Australia.

Technical Information

Basis: MS polymer.
Specific weight: 1.49 g/cm³.
Viscosity: hard paste.
Shore hardness (DIN 53505) after 3 weeks at 23°C/50%.
Relative humidity: +/- 54 Shore A.Shrinkage (DIN 52451): approx. 5%.
Density (DIN EN 27390): does not sag up to a 40 mm thick joint.
Elongation at break: > 500%.
Modulus at 100% elongation 23°C (DIN 53504 S2): 1.0 N/mm².
Tensile strength (DIN 53504 S2): 2.2 N/mm².
Skin formation: 3-5 minutes.
Hardening time:
24h - 2.7mm
48h - 4mm.
Temperature resistance: -40°C to +90°C.
Processing temperature: from +5°C to +40°C.
Chemical resistance: 
Good: water, salt water, aliphatic solvents, oils, greases, diluted organic acids and lyes.
Moderate: esters, ketones and aromatics.
Poor: concentrated acids and chlorinated solvents.
Weather resistance: perfect.
Shelf life: 15 months in closed, original packaging.
Safety measures: please read the safety data sheet.

Not sure if this is the right product for your application?

Contact Olmurtech today and tell us what you need to do and we will let you know what product is right for your job and how to use it.
Contact Information
  • Phone
  • Customer Service
  • Sales & Business Development
  • Address
Brendale Business Park
70/193-203 South Pine Road, Brendale, QLD, 4500
Contact Us
Scroll to Top